Item |
Photo |
Description |
10026
|
 | Nylon Hole Hot Punch
Shop Built - Prototype; Centering Plate, Currently Set to Burn 5 Holes at 1 Inch on Center; Comes with Extra Heating Elements, Centering Plates, Melting Tips, Etc. Adjustable Width 5/8 to 1 Inch Nylon.
Power Source: 240V / 1PH Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10027
|
 | T-ON Nylon Seal Cutter
Nylon Strap Cutter; Comes with Replacement Cutting Element
Power Source: 120V Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10028
|
 | T-ON Nylon Seal Cutter
Nylon Strap Cutter; (Comes with a 2nd Non-Working Parts Unit)
Power Source: 120V Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10049
|
 | Thomson Kick Press
Set Up for 4 x 6 Rivet. Sells with Box of Approx. (8000) 4 x 6 Rivets.
Model: 19 7281 Power Source: Foot Pedal Operation Dimensions: 23 x 36 x 66 Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10050
|
 | Stimson Rivet Machine
R1 Automatic Feed, Foot Activated, Manual and Extra Parts. Set Up for 3/8 x 6/16 No. 104 Tubular Rivet and No. 104 Caps; Sells with Approx. 65,000 Rivets
Model: C-1 Power Source: 120V Dimensions: 16 x 24 x 52 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10051
|
 | Stimson Rivet Machine
R1 Automatic Feed, Foot Activated, Extra Parts. Set Up for 3/8 x 5/16 No. 104 Tubular Rivet and No. 104 Cap; Sells with Approx. 50,000 Rivets
Model: C-1 Power Source: 120V Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10052
|
 | Stimson Rivet Machine
R1 Automatic Feed Parts Unit, Foot Activated, Extra Parts. Set Up for 3/8 x 9/16 No. 104 Tubular Rivet and No. 104 Cap. Sells with Approx. 28,000 Rivets and 10,000 Caps
Model: C-1 Power Source: 120V Condition: Runs. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10053
|
 | Stimson Rivet Machine
R1 Automatic Feed, Electric Powered. Head has been used for parts.
Model: C-1 Power Source: 120V Condition: Motor Runs. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10057
|
 | Weaver Rivet Kick Press
Modified with a Pneumatic Cylinder Triggered by Foot Switch and Tooled to Install an 804 Spike and Rivet 1/2 x 8 MM. Sells with Assorted Spikes and Rivets.
Power Source: Pneumatic Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10058
|
 | Husky Air Compressor
5HP / 26 Gallon Vertical Tank on Wheels, 5.8 CFM at 90 PSI
Model: VT631502AT Power Source: 120V Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10059
|
 | Standard Rivet
Rivet Machine on Bench, Automatic Feed, Foot Activated. Tooled for T2345 Jewel and Rhinestone Nailheads. Includes Extra Tooling for 2213 HD Gem Nailheads; Sells with Approx. 7,000 Assorted Spots.
Model: B-19 Power Source: 120V Dimensions: 26 x 26 x 61 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10060
|
 | Standard Rivet
Rivet Machine on Bench, Automatic Feed, Foot Activated. Tooled for No. 205 Round Spot. Includes Extra Anvil, Housing and Driver for No. 204 Spot. Sells with Approx. 3,000 Spots.
Model: B-19 Power Source: 120V Dimensions: 26 x 26 x 61 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10061
|
 | Standard Rivet
Rivet Machine on Bench, Automatic Feed, Foot Activated. Tooled for No. 641 Pyramid Spot. Includes Extra Anvil, Housing and Driver for Same Spot. Sells with Approx. 4,000 Spots.
Model: B-19 Power Source: 120V Dimensions: 26 x 26 x 61 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10062
|
 | Standard Rivet
Rivet Machine on Bench, Automatic Feed, Foot Activated. Tooled for No. No. 202 1/2 Round Spot. Includes Extra Tooling for No. 201 and 202 Round Spots, No. 621 and 626 Pyramid Spots and 0202 Acrylic Stones. Sells with Approx: 10,000 No. 201 Spots; 8,000 No. 202 Spots; 18,000 No. 202 1/2 Spots; 20,000 o. 621 Spots; 15,000 No. 626 Spots and 5,000 No. 0202 Stones.
Model: No. 3 1/2 Power Source: 120V Dimensions: 26 x 26 x 54 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10063
|
 | Western Cut-Out Machine
On Pedestal, Foot Activated, Sliding Tray, Includes Die for 1 1/2 and 2 Inch Billet Leather. Punches 4 Holes, Includes Tip Die.
Model: RMH Power Source: 120V Dimensions: 16 x 36 x 60 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10064
|
 | Western Cut-Out Machine
On Pedestal, Foot Activated, Sliding Tray, Includes Die for 1 1/4 Inch Billet Leather. Punches 5 Holes, Includes Tip Die.
Model: RMH Power Source: 208V / 3PH Dimensions: 16 x 36 x 60 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10065
|
 | Western Cut-Out Machine
On Pedestal, Foot Activated, Sliding Tray, Includes Die for 1 Inch Billet Leather. Punches 5 Holes, Includes Tip Die.
Model: RMH Power Source: 208V / 3PH Dimensions: 32 x 36 x 60 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10066
|
 | Western Cut-Out Machine
On Pedestal, Foot Activated, Fixed Tray, Includes Die for 3/4 Inch Billet Leather. Punches 3 Holes, Includes Tip Die.
Model: RMH Power Source: 208V / 3PH Dimensions: 16 x 36 x 60 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10067
|
 | Western Cut-Out Machine
On Pedestal, Foot Activated, Fixed Tray, Includes Die for 5/8 Inch Billet Leather. Punches 5 Holes, Includes Tip Die.
Model: RMH Power Source: 208V / 3PH Dimensions: 16 x 36 x 67 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10068
|
 | Western Strap Perforator
Bench Model Mounted on Pedestal with Table, Foot Activated, Light, Fixed Tray. Includes (6) Sets of Dies in Variable Patterns and Centering Plates for 3/8 to 2 1/2 Inch Leather. Includes Extra Rest Plates and Tubes.
Model: SP Power Source: 208V / 3PH Dimensions: 48 x 29 x 53 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10069
|
 | Western Strap Perforator
Bench Model Mounted on Table, Foot Activated, Fixed Tray. Includes Die for Tipping Ends, Centering Plate 3/8 - 1 1/2 Inch, Extra Set of Dies for Perforating 3/8 Inch Whip Straps and Plate for 1/2 Inch Straps. Punches 5 Holes and Die Top.
Model: SP Power Source: 120V Dimensions: 42 x 28 x 54 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10070
|
 | Western Strap Perforator
Bench Model Mounted on Table, Foot Activated, Sliding Tray. Includes Die for Cutting Slot for Buckles, 1/8 x 1 Inch Slot Centering Plate takes 3/8 to 1 1/2 Inch..
Model: SP Power Source: 208V / 3PH Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10071
|
 | Western Strap Perforator
Bench Model Mounted on Table, Foot Activated, Fixed Tray. Includes 3 Sets of Dies: Die Cuts Buckle Slot for 1/4 x 1 1/4 Inch with Centering Plate 3/8 to 2 Inch; Die Cuts Slits for 3/4, 1, 1 1/4, 1 3/8 and 1 1/2 Inch Slit with Centering Plate takes 1/4 to 2 Inch Braiding Leather; Die Cuts 5 Small Holes for 1/8 on 1/2 Inch Center withCentering Plate for 1/4 to 1 1/4 Inch.
Model: SP Power Source: 208V / 3PH Dimensions: 44 x 31 x 54 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10072
|
 | Western Strap Perforator
Mounted on Pedestal, Foot Activated, Sliding Tray. Sells with (12) Dies and Centering Plates for SP Machines in Various Configurations. Not All are Guaranteed to Fit.
Model: SP Power Source: 120V Dimensions: 18 x 21 x 54 VIN: Condition: Motor runs, machine functions, but has a bent motor shaft. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10073
|
 | Stanley Bostitch Stapler
Pedestal Mounted, Foot Activated, for SCCR25 1/3 Inch Staples. Includes 2 Extra Heads and Approx. 15,000 Staples.
Model: EAH82MCMD Power Source: 120V Dimensions: 16 x 24 x 48 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10074
|
 | United Shoe Machinery Eyeletting Maching
Table Mounted, Foot Activated.
Model: B Power Source: 120V Dimensions: 24 x 20 x 54 Condition: Working, but belt needs replacing. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10075
|
 | United Shoe Machinery Power Hammer
Mounted on Table, Foot Activated with Foot Pressure Control; 2 1/2 Inch Anvil; Comes with (2) Spare Heads for Parts and a Delta Shoe Machinery Power Pounder Head Only
Model: C Power Source: 208V / 3PH Dimensions: 44 x 27 x 43 Condition: Working but has a crack in housing base. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10076
|
 | Randall International Top Feed Skiving Machine
With Top and Bottom Roller Feed, Adjustable Top Head, Manual Top Head Lock, Guide, Angle Adjustment on Top and Bottom Feed, Sharpening Stone (extra stone), Blade (extra Blade), Tool Pouch, Parts Book.
Model: 81 TB Power Source: 120V Dimensions: 48 x 20 x 46 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10077
|
 | Randall International Top Feed Skiving Machine
With Top and Bottom Roller Feed, Adjustable Top Head, Manual or Foot Activated Top Head Lock, Guide, Angle Adjustment on Top and Bottom Feed, Sharpening Stone (extra stone), Blade.
Model: 81 TB Power Source: 120V Dimensions: 48 x 20 x 46 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10078
|
 | Schaefer Cementer
8 Inch Capacity; Top Head Adapted to Run 1 1/4, 1 1/2 and 2 Inch Strips.
Power Source: 120V Dimensions: 15 x 14 x 8 or 28 x 18 x 18 On Stand Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10079
|
 | Fortuna Splitter
12 Inch Splitter
Model: 657 Power Source: 208V / 3PH Dimensions: 40 x 28 x 47 Condition: Working, but missing belt for sharpener. Sitting on pallet. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10080
|
 | Randall International Power Strap Cutter
14 Inch Cutter; Manual Clutch. Set up to Cut on One Pass (7) 1 1/2 Inch Strips and (1) 3 Inch Strip
Model: 132 Power Source: 208V / 3PH Dimensions: 48 x 20 x 48 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10081
|
 | Randall International Power Strap Cutter
14 Inch Cutter; Manual Clutch. Set up to Cut on One Pass (13) 1/8 Inch Strips, (1) 3/8 Inch Strip and (1) 2 Inch Strip
Model: 132 Power Source: 208V / 3PH Dimensions: 48 x 20 x 48 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10082
|
 | Randall International Power Strap Cutter
14 Inch Cutter; Manual Clutch. Set up to Cut on One Pass (3) 3/8 Inch Strips, (4) 5/8 Inch Strips and (6) 1 1/4 Inch Strips
Model: 132 Power Source: 208V / 3PH Dimensions: 48 x 20 x 48 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10083
|
 | Randall International Power Strap Cutter
14 Inch Cutter; Manual Clutch. Set up to Cut on One Pass (10) 1 Inch Strips, (4) 1/2 Inch Strips and (4) 1/4 Inch Strips
Model: 132 Power Source: 208V / 3PH Dimensions: 48 x 20 x 48 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10084
|
 | Randall International Power Strap Cutter
14 Inch Cutter with Variable Speed Motor, No Clutch. Set up to Cut on One Pass (2) 3 Inch Strips, (9) 3/4 Inch Strips and (2) 1/2 Inch Strips
Model: 132 Power Source: 208V / 3PH Dimensions: 48 x 24 x 45 Condition: Working. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10085
|
 | Randall International Power Strap Cutter
Parts Unit Only. Working Gear Motor, Missing Slotted Plate, Extra Parts and Tooling, Extra Top Shaft, (2) Slotted Plates, Spacers, etc.
Model: 132 Power Source: 120V Dimensions: 48 x 20 x 46 Condition: No belts. Notes: Special Removal Day: Weds. Oct. 25th from 9AM to 4PM Taxable: No
|
10086
|
 | Herman Schwabbe Dytraulic Cutting Machine
Clicker: Front Arm, One of the Actuator Buttons Needs Replaced and has Been Bypassed (jumped out) for Operating
Model: D Power Source: 208V / 3PH Dimensions: 44 x 60 x 75 Condition: Working. Notes: Special Removal Date: Weds. Oct. 25th from 9AM to 4PM . This weighs approx. 3,000 lbs. Buyer will be a $75.00 Cash Only Fee due to the neighbor to bring forklift over and load the machine for you. Taxable: No
|
10163
|
 | Cutting Dies Lot
Mostly New Era Die Company; (28) Assorted Shaped Dies. 1/8 or 1/4 x 3/4 Inch.
Taxable: No
|
10164
|
 | Cutting Dies Lot
Mostly New Era Die Company: (6) Assorted Muzzle Cutting Shaped DIe. 1/8 or 1/4 x 3/4 Inch.
Taxable: No
|
10165
|
 | Cutting Dies Lot
New Era Die Company: (43) Strap Cutting Dies for Billet Ends and Full Straps. 1/8 or 1/4 x 3/4 Inch.
Taxable: No
|
10166
|
 | Cutting Dies Lot
New Area Die Company: (15) Assorted Shaped Dies. 1/8 or 1/4 x 3/4 Inch.
Taxable: No
|
10087
|
 | Eastman Round Blade Cutting Machine
3 1/4 Inch
Model: 154 Power Source: 120V Dimensions: 7 x 13 x 14 Condition: Working. Taxable: No
|
10088
|
 | Eastman Round Blade Cutting Machine
5 1/4 Inch
Model: KAD Power Source: 120V Condition: Working. Notes: Missing cord, you will need to get a cord to run machine. Taxable: No
|
10540
|
 | Cutting Block Pad
(1) 20 x 40 and (1) 18 x 32
Taxable: No
|